MATCHING SET OF WORM GEARS WITH EZ CINCH WORM BRACKET 1/4" BORE AND SPUR GEARS !

Description

MATCHING WORM AND WORM GEAR SETS. ALL ARE 32 PITCH AND ALL ARE
COMPATIBLE
WITH EACH OTHER
!
MULTIPLE CHOICE LISTING !
EACH BUY IT NOW IS FOR ONE PIECE OR ITEM OF YOUR CHOOSING !
THIS LISTING ALSO HAS SEVERAL SPUR GEARS THAT WILL MATE OR MESH WITH THE STEEL WORM. WHILE THEY ARE NOT DESIGNED TO WORK TOGETHER THEY WILL WORK FOR HOBBY/EXPERIMENT TYPE STUFF.  JUST DONT USE FOR AIRCRAFT INSTRUMENTATION OR ON A MARS PROBE !
ADJUSTABLE EZ CINCH-WORM BRACKET ! BRAND NEW !
IF YOU PAY BEFORE NOON EASTERN TIME I WILL MAIL YOUR ITEM THE VERY SAME DAY !
STANDARD RIGHT HAND THREAD SINGLE LEAD ON ALL WORMS !
ALL GEARS 25 TOOTH AND LARGER HAVE .2500" BORE
14.5 DEGREE PRESSURE ANGLE ON ALL WORM GEARS AND WORM
20 DEGREE PRESSURE ANGLE ON ALL SPUR GEARS
ALL ITEMS ARE SOLD EACH. CHOOSE YOUR SELECTION AND THEN ENTER A QUANTITY. THE COMPLETE WORM BRACKET ASSEMBLY DOES NOT COME WITH A WORM WHEEL. IF YOU WANT A WORM WHEEL YOU MUST SELECT IT FROM THE DROP DOWN BOX AND ADD IT TO YOUR CART.
The bracket uses high-quality precision ground shaft material that is manufactured by Precision Marshall IN THE USA.  2 stainless steel shaft collars hold the assembly in place. The brass worm wheel comes with a stainless steel setscrew and all of the worm gears come with a stainless steel setscrews. This assembly comes with 2 felt washers to hold extra oil and maintain lubrication.
This is very easy to use for the DIY’er. The mounting bracket uses two adjustable slots (.250” wide) for mounting and is very easy to set up and get the correct tooth mesh. Any 6 mm or quarter inch diameter mounting screw will fit through the slots for mounting purposes. (THE TWO 1/4-20 BOLTS ARE JUST FOR ILLUSTRATION AND ARE NOT INCLUDED)
Please look carefully at the photograph of the bottom side of the aluminum bracket and you will see that it has 4 pre-indicated dimples that can be drilled out by the user to add additional screws. (WE USE #8's)
Because our worm gear is larger than average size the helix angle is lower than a standard worm. For this reason you may also mate (MESH) this worm with one of our standard spur gears that is 32 pitch. These are all available in this listing.
AGAIN, WHILE THEY ARE NOT DESIGNED TO WORK TOGETHER THEY WILL WORK FOR HOBBY/EXPERIMENT TYPE STUFF.  JUST DO NOT USE FOR AIRCRAFT INSTRUMENTATION OR ON A MARS PROBE !
WE CURRENTLY HAVE 15 DIFFERENT SIZES OR RATIO CHOICES !
4 TRUE WORM GEAR SIZES
14 SPUR GEAR SIZES
1/4" BOLTS ARE NOT PART OF THE SALE. EXTRA SHAFT MATERIAL IS SOLD IN OUR EBAY STORE IF NEEDED.
PLEASE NOTE THAT THE SMALLEST 4 SIZES OF BRASS SPUR GEARS HAVE SMALLER BORES AND SMALLER SET SCREWS.
14 TOOTH = 1/8" BORE AND 4-40 SET SCREW
15 TOOTH= 1/8" BORE AND 4-40 SET SCREW
17 TOOTH= 1/8" BORE AND 4-40 SET SCREW
20 TOOTH 3/16" BORE AND 6-32 SET SCREW
If you have any questions please do not hesitate to ask.
IF YOU NEED SEVERAL ITEMS WE ALWAYS REFUND EXCESSIVE SHIPPING BACK TO YOUR
PAY-PAL
ACCOUNT. THIS IS DONE
SHORTLY
AFTER WE PRINT YOUR SHIPPING LABEL.
ALL ITEMS ARE SOLD EACH. YOU MUST SELECT EACH ITEM AND ENTER QUANTITY FOR EACH ITEM.
Once again if you pay by noon Eastern time I will mail this is the very same day !